Challenge conventional sample processing.
The mortar crusher version of the HP-WCSA is the perfect machine for weighing, crushing and splitting. The automated mortar crusher is used in many applications where the final product needs to be below 2 mm prior to splitting.
The unit is often included in automated robotic cells or automated linear systems. The crusher can be connected to an optional 30 position magazine and is equipped with an automated splitting unit. The integrated system automatically cleans itself between crushing and splitting cycles. Using the building block principle, this modular machine contains a weighing device, a sample lift, a mortar crusher, a linear splitter with a variable splitting ratio based on current ISO norms.
The linear splitter in the HP-WCSA complies with the ISO standards for representative splitting. The software controls allows completely flexible splitting of aliquot portions. Automatic feed and discharge magazines significantly increase the sample output and manpower efficiency.
Large coarse sample received in the laboratory are manually loaded into the sample containers of the feed magazine. The operating parameters are preselected at the integrated control panel and the automatic weighing, crushing and splitting cycle starts in the following sequence:
This machine will always produce the predetermined final sample weights independent of the weight of the incoming sample, due to a variable splitting ratio, which is automatically adjusted depending on the weight of the incoming sample. The machine is totally enclosed and sound insulated. Safety switches automatically deactivate the machine in case of operational malfunctions, which are displayed at the integrated control panel.
The machine is equipped with integrated pneumatic and electrical control cabinets and PLC controls. This allows the machine to run individually or in combination with any other modular machine. The HP-WCSA can easily be combined with other modular IMP machines such as feed and discharge magazines, an automatic pulverizing mill, and where applicable with an automatic pellet press or an automatic fusion machine.
Sample size: <8 mm recommended
Sample mass: 10 -15 kg
Achievable grain size: Nominally -2 mm
Splitting ratio: Variable, depending on splitter type
Dimensions: 850 x 950 x 2500 mm
Weight: ≈ 1560kg
Power requirements: 400 V, 3 Phase, 50 Hz
Power consumption: ≈ 8.5 kVA
Compressed air requirements: 6 bar – 10 bar
Compressed air consumption: 1200 L/sample