Brazil
Clique aqui para acessar o site em Português
Brazil
English
Please Click here to View the Site in English
English
Spanish
Haga clic aquí para ver el sitio en Español
Spanish
French
SVP cliquez ici pour consulter le site en français
French
Chinese
请点击这里查看IMP中文网站
Chinese /
Products

Think "Different"!
Challenge conventional sample processing.

IMP

Menu

Enquiry

Sample Preparation » Pulverizing » Laboratory disc mill

Laboratory disc mill


The laboratory disc mill is used for the quick, dust-free grinding of minerals, organic and ceramic materials and numerous brittle metals to analytical fineness, without loss of fines. For laboratory disc mill, the feed size, depending on the grinding barrel size and material should not exceed 5 - 15 mm. Depending on the product, the final particle size for dry grinding is minus 40 μm and down to below 1 μm for wet grinding.

 

Samples up to 250 cm³ can be processed with the correct grinding barrel. The material to be ground is put into a grinding barrel chosen to suit the demands of the analysis and sample quantity. By means of predominantly horizontal vibrations, the material is ground by impact and friction, usually in minutes and at the same time homogenised. With the TS models, the machine will automatically stop when the previously set time has lapsed after which the grinding barrel can be removed. This allows a high degree or repeatability in the sample preparation.


The laboratory disc mill is manufactured in two versions, as T and TS models. For laboratory disc mill, the T Model is the low cost version without a control unit and sound proofed housing. The TS version is ready for connecting including all controls, timer and sound absorbing material in a steel housing, mainly for use in the laboratory.

Enquiry

Fields Marked with a * are required
*First Name
Last Name
Product
*Email
Phone Number
Comments enquiry
Country
Company