Brazil
Clique aqui para acessar o site em Português
Brazil
English
Please Click here to View the Site in English
English
Spanish
Haga clic aquí para ver el sitio en Español
Spanish
French
SVP cliquez ici pour consulter le site en français
French
Chinese
请点击这里查看IMP中文网站
Chinese /
Products

Think "Different"!
Challenge conventional sample processing.

IMP

Menu

Enquiry

Steel Industry » Raw Materials Testing » Pulverizing » HP BTM Combo Crusher Mill

HP BTM Combo Crusher Mill


The HP BTM combination machine consists of a crusher, splitter and pulveriser all in one. The machine has been designed with maximum operator safety and ergonomics in mind. The operator is not required to bend, lift product or climb stairs to operate the system.

 

The crusher can accept up to 15 kg samples with a maximum particle size of 50 mm. The output from the crusher can be adjusted to produce a product of -3 mm, and it is possible with some ores to achieve - 2 mm.

 

Samples are loaded manually, then the flap closes and the cycle starts. The sample is weighed internally in the machine to obtain the sample mass required for the splitter. The sample is then transported up the lift and entered into the crusher.

 

The crusher reduces the sample to the desired output particle size. A flow sensor determines when the crushing cycle is complete. On completion of the crushing cycle the crusher is cleaned, ready for the next sample. The product from the crusher can be made available to the operator if required. This position is also where previously crushed samples can be added into the system for pulverising should this option be needed. In essence the pulveriser and crusher can operate independently of each other for maximum flexibility.

 

The product from the crusher is conveyed automatically to a linear splitter that splits out a portion for pulverising and a waste portion. The integrated linear splitter can be set to produce an accurate split from 300 g up to 1.2 kg as required. The maximum mass is dependent on product density. The waste portion can be collected in a calico or plastic bag or alternatively a transfer pipe can be moved into the discharge position which will allow the product to fall through into a waste removal system.

 

Should the crushed portion require milling, it is automatically transferred from the splitter to the pulveriser. The pulveriser first weighs the sample to confirm that the splitter operated correctly, and if the mass is not within the expected range then the operator is alerted to this fact. If the mass falls within the expected range, the sample is pulverised according to the parameters set and then presented to the operator on the conveyor belt at an ergonomic height.

 

Multiple samples can be accumulated on the belts to minimise the amount of operator interaction required.

 

Technical Specifications

Sample size: <50 mm

Sample mass: <15 kg

Achievable crushed grain size: Nominally -3 mm

Achievable milled grain size: Nominally -75 µm

Splitting ratio: Variable

Dimensions: 2410 x 2000 x 2160 mm

Weight: ≈2970 kg

Power requirements: 400 V, 3 Phase, 50 Hz

Power consumption: ≈15 kVA

Compressed air requirements: 5 bar – 10 bar

Compressed air consumption: 1500 L/sample

 

Enquiry

HP BTM Combo Crusher Mill

HP-BTM_Data_Sheet.pdf

HP BTM Combo Crusher Mill

New Combo Crusher Mill.pdf

Fields Marked with a * are required
*First Name
Last Name
Product
*Email
Phone Number
Comments enquiry
Country
Company